After diamond, sapphire is the next hardest gemstone, and it also the most expensive gemstone. When buying blue sapphire gemstone, you should know how to judge the grade of the stone to ensure that you are buying the best quality. It’s also buying smart by knowing where and exactly how to look to avoid getting cheated.
- Know what quality of blue you need:- Blue Sapphire gemstone comes in blue Color, with the lightest being Sweden princess blue and the darkest being navy or black. The most valued color is royal blue, which is in the center of the scale. Camelot and commodore blues, that are one shade lighter and darker, respectively, are similar in hue but slightly less expensive.
- Take the hue into consideration: – Blue sapphire has a pure blue hue, or they could be tinted by purple and green. By value, pure blue have the highest value followed by small crimson tints. Strong crimson hues and any modifying hue are believed to be undesirable generally.
- Go through the transparency of the stone: – Transparency is often overlooked when buying blue sapphire stone, however the more transparent a stone is, a lot more outstanding it shall look. Transparent stones can be expensive too though. Completely transparent and clear stones permit the most light to pass through.Semi-opaque and opaque stones allow little to no light to pass through and are valued less.
- Consider unusually colored sapphires:- While blue is the most common color for a sapphire, these gemstones are also available in other colors. Padparadscha sapphires, which can be orange-pink, are rare and considered valuable. Green sapphires are popular also. Colorless, yellow, and fancy sapphires are less valued significantly.
- Be familiar with how origin influences the price: – The location in which a sapphire was mined can have an enormous effect on its overall cost. Blue Sapphires mined in Mogok, Kashmir, Burma, and Ceylon are normally valued more than those mined somewhere else usually. Typically, that is basically because the quality of sapphires from these mines is better than those from almost every other location. This isn’t always true, though, and spending money on origin is similar to spending money on a brand. You can spend less by purchasing quality sapphires from “lesser” mines.
- Focus on cut:- Cut deals with the facets on the gem’s surface, which allows light to pass through and color to glow at its finest. A brilliant cut Blue sapphire stone has better color, while shallow stones often look too large and appear lighter in tone. The cut of the sapphire is graded over a range of excellent usually, very good, good, good, and poor. Look for grading from genuine Govt. certified labs. Jewelers might provide their own grading, but a third party certification is better.
- Expect more inclusions in blue sapphire Stone: – A sapphire’s clarity grade identifies the amount of inclusions or breaks inside the gemstone. The fewer splits, the more costly a gemstone will be. Look for genuine third-party grading from a Govt. approved lab like the GJI- Gemology & Jewellery Institute.
- VVS (somewhat included), VS (lightly included), and SI-1 (lightly included) stones have few inclusions, and the inclusions they have got do not have an effect on the brilliance of the natural stone.
- SI-2 stones have inclusions that are evident under magnification, but have a influence on the stone’s brilliance.
- I1, I2, and I3 have inclusions and surface blemishes that are evident without magnification even.
- Don’t be afraid to choose Sapphires with acceptable treatments:- Most sapphires are heat-treated to improve color or clarity or both. Untreated stones that are free of inclusions and have superior colors are very expensive and rare, but because heat therapy is so commonplace, a heat-treated sapphire can be valuable too.
Shubh Gems Deals only in natural & certified blue sapphires.We source directly from mines so that we can provide best gemstones at affordable prices. Call us for more details :- 8010-555-111.